1. Acknowledged the properties and qualifications of the film
2. The overlay of some ellipses cannot be attached and may cause the film to peel off before the application lifetime as the windshield surface at the installation area is not smooth and seamless.
3. The installation of the film may affect the defroster lines and the antenna may be damaged, where the cases are not in the details of the quality warranty.
4. Acknowledging the appropriate maintenance approaches (Details specified according to the instructions after the film installation)
5. Acknowledging the installed film appropriate quality inspection approaches after the installation. (Details specified according to the instruction of the quality inspection)
6. Acknowledging the appropriate steps to fill out a quality warranty
registration card and details of quality warranty exceptions. (Details specified in accordance with the quality warranty guidelines)
7. Visibility from sightseeing through the windshield compared to tinted film may be somewhat different.
8. The film installation at the operation area of the signal receiver, navigation system or navigator may affect the signal reception (if any).
9. The film installation on the front windshield of any model regardless of where the film is coated with metal, when driving through dark yellow lights, a watermark would appear from the front console and when driving through the dark yellow light, the watermarks will disappear. In Bangkok, there will be 3 large spots, namely, the highway, Vibhavadi-Rangsit, inbound-out, North Park tunnel, Laksi and under the Rajchonnee
overpass - Central Pinklao area and Pata Pinklao. In this case, the company warranty is not covered due to the above case in the returns or exchanges of the installation.
Instruction after the film installation
Maintenance instruction on the film after the installation
1. In general, the optical tinted film installation practice requires a specific solution or film-on solution to spray onto the adhesive and windshield panels for the fitting placement. Then pressed the solution out with specific tools. Therefore, after installation, there may be waterlogged, blurred or frosted at the installation area at the windshield. These indications will disappear within 1-4 weeks (5-8 weeks for safety film), except the L60Max Special, which will disappear in 4-6 weeks when the film is completely dry and the solution fully function in the adhesive installation. Consequently, during the first 7 days (14 days for safety film) after installing, it is highly recommended not to should not slide the windshield up and down as the film could be affected.
2. It is strictly not to wipe, rub, or clean the windshield until 21 days after the installation.
3. It is advised to apply a clean cloth and only clean water to wipe the film installed windshield and wipe it dry.
4. Do not rub or clean the interior windshield with a cloth to wipe the car body, car seat, or refreshing towel, bristles, sponge and other materials, as it may contain chemicals, dust particles, gravel or other substances including sharp objects, which would damage the film surface and leads to scratches, marks, peels or flaky. In the case of defects due to the above cases occur, the company cannot provide the coverage under the quality guarantee conditions.
5. Do not wipe, rub with refreshing towels, washing sponges, bristles or other materials that cause damage to the film.
6. Do not wipe with a glass cleaner containing ammonia, as this will cause the deterioration of the adhesive to peel off. Only clean water should be used.
7. Installed film joints can be seen in cases where the windshield is very curved and may be shown for more than 1 mark in some automotive models.
8.After the installation for 1-7 days (1-15 days for safety film), if air bubbles, not water stains, are sight. Please contact the service center and bring your car in for the mend immediately.
ที่มา:
1. InternationalWindowFilmAssociationFlatGlassEducationGuide
2. AIMCALEnergyManagementProgramWindowFilmTrainingGuide
3. LaminaFilmsManufacturer
4. Techno-sell (Frey) Co., Ltd., solely importer and distributor of "Lamina" automotive solar protection film filters in Thailand
ฟิล์มอาคาร
"ลามิน่า ลูมาร์" ป้องกันรังสี UVA, UVB มีฟิล์มหลากรุ่นให้เลือกตามสไตล์เจ้าของบ้าน ฟิล์มอาคาร ฟิล์มกันความร้อน ฟิล์มกรองแสงอาคาร ให้บ้านและอาคารดูสวยเงางามเหมือนใหม่อยู่เสมอ
สามารถเลือกชมฟิล์มติดรถยนต์ ฟิล์มกรองแสงรถยนต์ ได้ที่
https://laminafilms.com/ฟิล์มกรองแสงติดรถยนต์
หรือ
เลือกชมฟิล์มติดอาคาร ฟิล์มกรองแสงอาคาร ฟิล์มกันความร้อนอาคาร ได้ที่
https://laminafilms.com/ฟิล์มกรองแสงติดอาคาร
หรือ
ติดตามข่าวสารเพิ่มเติม ได้ที่
Facebook : www.facebook.com/FilmLamina
สอบถามเพิ่มเติม ได้ที่ 0 2885 2500
Call Center 0 2422 2345
อ่านต่อ