film price

Estimate Building
Film Price

Suggestions in the film selection for cost effective and maximum benefit

Selecting of the window tinted film should be considered from

1. Quality 
The tinted film with good quality comes with the properties such as % heat reduction, % UV reduction, % reflectivity and% transmittance, which must be specified according to the standard values from a reliable manufacturer. Moreover, the tinted film should conform to the standards of AIMCAL (INDUSTRIAL OF INDUSTRIAL METALLIZERS COATERS AND LAMINATORS), ASTM (AMERICAN SOCIETY FOR TESTING AND MATERIALS) and ASHRAE, not the printed value or advertisement without any references.

2. Manufacturer standard
Another factor that should be considered is the distinctive source or factory of film e.g. imported from factories certified by international standards, been accepted and trusted with an explicit location of factory. Currently, the optical tinted film produced in the United States factory is ISO 9001 certified, where a quality control system covers the design and development, production, installation and service. The manufacturer will provide a copy of traceable certificate certified by ISO 9001 for the agents and distributors in Thailand, where consumers can trace back.
3. Distributors in Thailand
The distributors be reliable, sincere, intend and hold a continuously long-term experience in the optical tinted film business, and not intend to publish false advertising promotion or change the brand gradually. The distributors also should hold a standard for reliable quality warranty. In general, the quality warranty is no less than 7 years and will not liable when the automotive registration holder's name is changed. Therefore, it is recommended for consumers to confidently choose a distributor with the warranty period that the company will continue to operate the optical tinted film business and is ready to take responsibility if any installed film experiences any issues. Another major factor to be considered is a distributor should be officially certified by the manufacturer to be an agent in Thailand, with the traceable letter of certification of the distributor.
4. Price
The optical tinted film price must be reasonable and acceptable with the equivalent quality. In addition, the sputtered and thermal coated metal film is approximately 1-2 times higher than the general color film.
5. Advertisement
Consumers should carefully consider advertisements of various optical tinted films before selecting one. The advertisements should provide the correct information and no exaggerated propaganda.
Especially about % thermal cut and various properties of the optical tinted film, which the correct % thermal cut must be % of sun thermal cut reduction value. In addition, the factor that should be considered is the approach to test whether the quality of the window film is reliable or not. For example, the optical tinted film should not be tested with spotlight or infrared tube, allowing consumers to put hands or standing in the middle of the heat source. This is because when driving, driver actually drive under the sunlight, not just a spotlight or infrared light, which these three types of light sources are totally different and sometimes there are cases where the different type of film installed or installed in a double layer overlay to test. At this point, consumers are highly recommended to select the optical tinted film carefully.

ฟิล์มรถยนต์ ฟิล์มอาคาร กันร้อน กันUV สูง ผู้นำฟิล์มยุคดิจิทัล ทันสมัยที่สุด ฟิล์มดำนอกสว่างใน ไม่หลุดล่อน ฟิล์มใสกันร้อนสูง ฟิล์มเซรามิก

สามารถเลือกชมฟิล์มติดรถยนต์ ฟิล์มกรองแสงรถยนต์ ได้ที่ฟิล์มกรองแสงติดรถยนต์

หรือ เลือกชมฟิล์มติดอาคาร ฟิล์มกรองแสงอาคาร ฟิล์มกันความร้อนอาคาร ได้ที่ฟิล์มกรองแสงติดอาคาร

หรือ ติดตามข่าวสารเพิ่มเติม ได้ที่
Facebook :

สอบถามเพิ่มเติม ได้ที่ 0 2885 2500
Call Center 0 2422 2345